Indicatore di flusso SP Bel-Art Roto-Flo in polistirene per tubi con DI da ³/₁₆ a ¼ di pollice (H19937-0001) Blu, DI 3/16" - 1/4"

Brand:SP Bel-Art

2.8/5

53.63

Non per l'uso con sostanze chimiche corrosive o fluidi con una temperatura superiore a 64 gradi C (147 gradi F). Il diametro interno del canale di flusso è di 5 mm, il guscio della ruota a pale è di 25 mm, la lunghezza totale è di 51 mm. Corpo in polistirene trasparente stampato con punte di collegamento lisce per una facile installazione. La ruota a pale in polipropilene dai colori vivaci gira quando il gas o il liquido scorre attraverso un sistema. Visualizzazione immediata del flusso; estremità del tubo dritte.

Prodotto non disponibile
Non per l'uso con sostanze chimiche corrosive o fluidi con una temperatura superiore a 64 gradi C (147 gradi F). Il diametro interno del canale di flusso è di 5 mm, il guscio della ruota a pale è di 25 mm, la lunghezza totale è di 51 mm. Corpo in polistirene trasparente stampato con punte di collegamento lisce per una facile installazione. La ruota a pale in polipropilene dai colori vivaci gira quando il gas o il liquido scorre attraverso un sistema. Visualizzazione immediata del flusso; estremità del tubo dritte.
Is Discontinued By Manufacturer No
Item model number 199370001
Manufacturer Bel-Art Products
Product Dimensions 2 x 0.2 x 1 inches; 1.1 Pounds

2.8

8 Review
5 Star
58
4 Star
7
3 Star
7
2 Star
11
1 Star
18

Scrivi la tua recensione

La tua mail non sarà pubblicata. Tutti i campi obbligatori sono segnati con*

Scritto da: Belinda
Well made but not for our purpose which is 6.6 GPM /400 GPH .
But the Wife now has a neat sounding Kazoo to blow into to make cool sounds . No sweat here she likes to annoy me with it ,and I totally have ot coming.
Scritto da: Quincy Acklen
All 3 sizes are only 1/4" of actual flow (read seller's description)
As is clearly stated in the item description - the internal flow channel of all three differently sized items is the same - 5mm. I wanted 1/2" and the only thing that is 1/2 inch is the flange on the 5mm channel. If you're counting on full 1/2" flow, this will reduce the flow! As it turns out it was an acceptable (if undesirable) reduction, so I kept it installed. It does work well. And there was nothing devious about the seller or the description, I just missed and and want to call it out for others. I thought this product was the answer because I just couldn't find reasonably priced flow indicators much above 1/4". I was fooled (again no fault of the seller) so hopefully you won't be.
Scritto da: JonH
Not sensitive for air
Not very sensitive for air flow. I measured 2.5-3 LPM before the indicator will spin. The brochure that is included with the device says a minimum of 2 LPM is required for use with air. They should specify that in the product description. The 0.5 LPM specification is for liquid, most likely water.
Scritto da: Ronald Heidorn
WORKS WELL
OVER PRICED COULD NOT FIND A LESS EXPENSIVE ONE, USED IN A ENEMA HOSE
Scritto da: Stan, Cooking at Home
But the fllow indicator woks fine.
The hose connectors are too small. But the fllow indicator woks fine.
Scritto da: Pries
So simple its GREAT!
Its so simple its fool proof!! I used it on my tap beer co2 line to tell if i had a leak. Simple, well built and is perfect for me!
Scritto da: Fun lover
only works at moderate to high flow rates
if you're using this to indicate flow where there is very little flow, (less than say, 1.5 gallon per hour, as an educated guesstimate) it will not work. the spinner in the middle doesn't spin. a little dissapointed by that.
Scritto da: Bureiku
Cool tool to show flow
Works exactly as advertised. A great little tool to show flow. The package came with a great tip on how to install, which I estimate saved me a hour of frustration.

Prodotti correlati

Scopri il nostro network internazionale

Spediamo in 28 paesi, oltre 200.000 prodotti. Resta aggiornato, iscriviti alla newsletter.

Shopping Cart